Replacing the Lamp on the Dell 1430x projector

Replacing the Lamp on the Dell 1430x projector

Dell 1430x projector lamp have an expected operating time Up to 3,000 hours Normal mode and Up to 5,000 hours Eco-Mode. Dell 1430x display message :Lamp failure (LED Indicator,Power LED=OFF,Menu LED=OFF,Temp LED =OFF,Lamp=Amber), Lamp defective. Replace the lamp.Lamp is reaching its end of usable life.

Changing the Lamp

1. Turn off the projector and disconnect the power cord. 
2. Let the projector cool for at least 30 minutes. 
3. Loosen the screws that secure the lamp cover, and remove the cover. 
4. Loosen the screw that secures the lamp. 
5. Pull the lamp up by its metal handle. NOTE: Dell™ may require lamps replaced under warranty to be returned to Dell™. Otherwise, contact your local waste disposal agency for the address of the nearest deposit site. 
6. Replace with the new lamp. 
7. Tighten the screw that secures the lamp. 
8. Replace the lamp cover and tighten the two screws. 
9. Reset the lamp usage time by selecting "Confirm" for Lamp Hour Reset in the Power Settings

When a new lamp module has been changed, the projector will automatically detect and reset the lamp hours.