BenQ W1080ST 1080P 3D Projector

BenQ W1080ST Projector
BenQ W1080ST 's amazing Projector with support 3D and 1080P Full-HD content.The BenQ W1080ST features Native Full HD 1080P (1920x1080) Resolution ,2,000 ANSI Lumens, 10,000:1 High Contrast Ratio,Short Throw Lens, SmartEco™ Power Saving Technology ,Various 3D Format and nVidia 3DTV Play ,REC 709 Color Performance.

BenQ W1080ST Specifications

• Model W1080ST
• Projection System DLP 
• Native Resolution 1080p (1920 x 1080) 
• Brightness* (ANSI Lumens) 2000 
• Contrast Ratio 10000:1 
• Display Color 1.07 Billion Colors 
• Lens F= 2.6-2.78, f=10.2-12.24mm 
• Aspect Ratio Native 16:9 (5 aspect ratio selectable) 
• Throw Ratio 0.69-0.83 (65.7"@ 1M) 
• Image Size (Diagonal) 38"-300" 
• Zoom Ratio 1.2:1 
• Lamp Type 240W 
• Lamp Mode (Normal/Economic/SmartEco/LampSave/LumenCare)* 3500/5000/6000/NA/NA hours 
• Keystone Adjustment 1D, Vertical ± 20 degrees 
• Projection Offset 105% ± 5% 
• Resolution Support up to WUXGA 
• Horizontal Frequency 15K-102KHz 
• Vertical Scan Rate 23-120Hz 
• Interface Computer in (D-sub 15pin) x 1 HDMI x 2 Composite Video in (RCA) x 1 S-Video in (Mini DIN 4pin) x 1 Component Video in x 1 Audio in (Mini Jack) x 1 Audio L/R in (RCA) x 1 Audio out (Mini Jack) x 1 Speaker 10W x 1 USB (Type B) x1 (for service) RS232 (DB-9pin) x 1 DC 12V Trigger x 1 
• Dimensions (W x H x D mm) 312x104x244 
• HDTV Compatibility 480i, 480p, 576i, 567p, 720p, 1080i, 1080p 
• Video Compatibility NTSC, PAL, SECAM, SDTV 
• Weight 2.85KG 
• Audible Noise (Normal/Economic Mode) 33/30 dBA 
• Power Supply AC100 to 240 V, 50 to 60 Hz 
• Power Consumption 353W/110V (typical), Standby < 0.5W 
• On-Screen Display Languages Arabic/Bulgarian/ Croatian/ Czech/ Danish/ Dutch/ English/ Finnish/ French/ German/ Greek/ Hindi/ Hungarian/ Italian/ Indonesian/ Japanese/ Korean/ Norwegian/ Polish/ Portuguese/ Romanian/ Russian/ Simplified Chinese/Spanish/ Swedish/ Turkish/ Thai/ Traditional Chinese (28 Languages) 
• Picture Modes Dynamic / Standard / Cinema / 3D / User 1 / User 2 / User 3 
• Accessories (Standard) Remote Control w/ Battery Power Cord (by region) User Manual CD Quick Start Guide Warranty Card (by region) VGA(D-sub 15pin) Cable Carry Bag 
• Accessories (Optional) Spare Lamp Kit Ceilling Mount 3D Glasses

Replacement Lamp for Epson EX3220 (V13H010L78)

V13H010L78 Replacement Lamp for Epson EX3220 (ELPLP78) The V13H010L78 genuine Epson ELPLP78 ultra high efficiency (UHE) projector lamp is designed to replace the original genuine Epson projector lamp included with: PowerLite 1222 and 1262W; EX3220/EX5220/EX5230/EX6220/EX7220/ VS230/VS330/VS335W projectors.

The Epson projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system. Replace the lamp as soon as possible when the following occurs: • The projected image gets darker or starts to deteriorate • A message appears when you turn on the projector telling you to replace the lamp • The projector's lamp light is flashing orange and its power light is flashing blue Replacing the projector bulb Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot. Warning: Let the lamp fully cool before replacing it to avoid injury. You can replace the lamp while the projector is mounted to the ceiling, if necessary. 1. Turn off the projector and unplug the power cord. 2. Allow the projector lamp to cool down for at least one hour. 3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you open the lamp cover. 4. Slide the lamp cover out and lift it off.

5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.

6. Grasp the raised section of the lamp and gently pull the lamp out of the projector.

7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way.

Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure. 8. Push in the lamp firmly and tighten the screws to secure it.

9. Replace the lamp cover and tighten the screw to secure it.

Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage. Resetting the Lamp Timer PowerLite 1222 and 1262W; EX3220/EX5220/EX5230/EX6220/EX7220/ VS230/VS330/VS335W projectors You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly. Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Reset menu and press Enter.

4. Select Reset Lamp Hours and press Enter. You see a prompt asking if you want to reset the lamp hours. 5. Select Yes and press Enter. 6. Press Menu or Esc to exit the menus.

UC28 PRO Mini LED Projector

UC28 PRO Projector
 UC28 PRO Mini Projector with the most cost efficient entry-level projector.UC28 PRO Mini LED Projector suitable for dark place personal entertainment Cinema Theater.UC28 PRO Powerful Connectivity (VGA/AV/USB/SD/HDMI) It supports popular file formats EG.Real Video 2.0/3.0/4.0, AVI(XviD/H264), MOV,WMV(WMV7/8/9),FLV, allowing you to share movies, videos, and photos with friends and family.

 

UC28 PRO Features

• Origin China
• Model Number UC28 
• Brand Name UNIC 
• Lamp LED (20k hours) 
• Lens f=125 
• Projection Distance 1-3.5meters 
• Contrast: 300:1
• Resolution 320x240 
• Size 127x126x56mm 
• Weight 0.45kg
• Power supply voltage: AC110-240V/50-60Hz
• Total power:16W 
• Input: AV/USB/SD Card
• Brightness: 40 lumens
• Bulb Type: 10W LED